Tag: process of making zeolite pellets

May 10, 2024

How to use disc granulator to make 10 t/h zeolite pellets

Disc granulator, also known as plate granulator machine, is a widely used fertilizer granulator machine in the production of zeolite pellets. It is a popular choice for making 10 t/h zeolite pellets due to its high efficiency, easy operation, and low cost. In this passage, we will discuss how to use a disc granulator to make 10 t/h zeolite pellets.

Preparation before Granulation

Before using the disc granulator to make zeolite pellets, it is important to prepare the raw materials. Zeolite powder should be mixed with a binder to ensure the pellets have the right consistency and strength. The binder can be water, clay, or any other suitable material that can help the zeolite powder stick together. The mixture should be thoroughly mixed to ensure a uniform consistency.

Setting up the Disc Granulator

Once the raw materials are prepared, the next step is to set up the disc granulator. The granulator should be placed on a flat and stable surface to ensure it operates smoothly. The angle of the disc should be adjusted to the desired level, usually between 40 to 60 degrees. The rotation speed of the disc should also be set according to the manufacturer’s instructions.

disc zeolite pellets making plant
disc zeolite pellets making plant

Feeding the Raw Materials

After setting up the disc granulator, the next step is to feed the raw materials into the machine. The feeding rate should be adjusted to match the capacity of the granulator, which is 10 t/h in this case. The raw materials should be fed evenly and continuously to ensure the pellets are of consistent size and shape.

Granulation Process

As the raw materials are fed into the disc granulator, they are subjected to a combination of centrifugal force, gravity, and friction. This causes the materials to roll and collide with each other, forming small pellets. The size and shape of the pellets can be adjusted by changing the angle of the disc and the rotation speed.

Drying and Cooling

Once the pellets are formed, they need to be dried and cooled before they can be used. The drying process removes any excess moisture from the pellets, while the cooling process helps to harden them. The pellets can be dried using a rotary dryer and cooled using a cooler or by air-drying.

Packaging

After the pellets are dried and cooled, they can be packaged for storage or transportation. The packaging material should be chosen based on the intended use of the pellets. For example, if the pellets are to be used as a feed additive, they should be packaged in food-grade bags.

In conclusion, using a disc granulator to make 10 t/h zeolite pellets is a straightforward process that involves preparing the raw materials, setting up the granulator, feeding the materials, granulating, drying and cooling, and packaging the pellets. By following these steps, you can produce high-quality zeolite pellets for various applications.

Tags: ,
December 12, 2023

How to make zeolite pellets

Subtitle 1: Introduction to Zeolite Pellets

Zeolite pellets are highly porous, crystalline structures that possess remarkable adsorption properties. These pellets find applications in various industries, such as water purification, gas separation, and catalysis. This comprehensive guide will walk you through the step-by-step process of making zeolite pellets, providing insights into the materials required and the key stages of production.

Subtitle 2: Materials Required

Before delving into the production process, gather the following materials:

  1. Zeolite Crystals: Select a zeolite type suitable for your application. Common choices include clinoptilolite, mordenite, or faujasite.
  2. Binder: Choose a binder that can withstand high temperatures and effectively bind the zeolite crystals. Sodium metasilicate or sodium aluminate are often suitable choices.
  3. Water: Pure, distilled water is essential for creating a homogenous mixture.
  4. Pelletizer: Invest in a pelletizing machine capable of forming the zeolite-binder mixture into uniform pellets.
  5. Drying Equipment: You will need an oven or a rotary dryer to remove moisture from the formed pellets.

Subtitle 3: Production Process

Step 1: Zeolite Activation

Begin by activating the zeolite crystals to remove any existing water content. Place the zeolite in an oven or heat source at temperatures ranging from 300 to 500 degrees Celsius for a specified duration, typically a few hours.

Step 2: Mixing Zeolite and Binder

Combine the activated zeolite crystals with the chosen binder in the desired ratio. Gradually add distilled water to the mixture, ensuring a consistent blend. The goal is to create a paste-like consistency that facilitates pellet formation.

Step 3: Pellet Formation

Use a pelletizer to shape the zeolite-binder mixture into pellets of the desired size. The pelletizer applies pressure to the mixture, forcing it through a die to form uniform pellets. Adjust the machine settings to achieve the desired pellet size and density.  Pan granulator machine and drum granulator equipment are the best choice for you.

Step 4: Drying the Pellets

Transfer the freshly formed pellets to a drying apparatus. This can be a rotary dryer or a controlled-temperature oven. The drying process is crucial for removing excess moisture and solidifying the pellets. Maintain a temperature appropriate for the chosen binder to ensure optimal drying without compromising the zeolite structure.

Subtitle 4: Quality Control and Testing

After the pellets are dry, conduct thorough quality control checks. Inspect the pellets for uniformity, density, and structural integrity. Perform adsorption tests to verify the effectiveness of the zeolite pellets for the intended application.

Subtitle 5: Application Considerations

Understand the specific requirements of your intended application. Whether it’s water purification, gas adsorption, or catalysis, tailor the zeolite pellet production process to meet the performance criteria of your end-use.

Subtitle 6: Conclusion

Creating zeolite pellets involves a meticulous process that combines science and engineering. By following these steps and considering the specific needs of your application, you can produce high-quality zeolite pellets with consistent performance. Experiment with different zeolite types and binders to optimize your production process and contribute to advancements in diverse industries. So how to setup a zeolite pellets plant? SX can give you a answer.

Tags: , ,